Low armchair

The finish codes and colour names the supplier’s book records against this piece, as printed.

• 100 white — Aluminium tube frame (Twins)
• 101 black — Aluminium tube frame (Twins)
• 107 brown — Aluminium tube frame (Twins)
• 109 Champagne

same fabric programme as C172D (3D Mesh Omega, Tempotest, Dolce/Duo Outdoor, Silvertex, Zander)

Printed colours are approximate — specify against a physical sample.

Or ask the desk about finishes for this piece →

Cushion thickness is deck arithmetic, not a style choice: the maker builds the bare frame deck low or high knowing what will sit on it, and the cushion is the remainder to a comfortable finished seat. That is why a dining pad runs thin and deep seating runs thick — neither is an upgrade on the other.

For a dining chairs or armchair

3–6 cm seat pad — slim enough that the shell still reads and knee room under a 74 cm table survives. A metal shell takes the slimmer end with a non-slip base; teak and woven frames carry 4–6 cm, with an optional tied back pad.

Core

Exposed pieces take an open-cell, fast-draining (reticulated) core: water passes straight through instead of pooling in the foam. A crowned profile sheds standing water by geometry. Neither makes a cushion waterproof — outdoor builds drain, they do not seal.

Fabric

Outdoor cloth earns its keep in the fibre. Solution-dyed yarn carries its pigment all the way through the fibre, so colour survives sun and scrubbing; surface-dyed cloth wears its colour off. Performance fabrics are water-resistant rather than waterproof, and mildew grows on dirt sitting on the cloth, not in the fibre itself — which is why the published care is washing, drying and standing a soaked cushion on edge to drain.

Patterns & your own fabric

Fabrics and patterns are fully specifiable — plains, stripes and prints, with repeat, direction and railroading captured in the brief so a pattern lands straight on every panel. Many pieces also accept customer’s own material (C.O.M.) — the brief asks rather than assumes.

Made to order through our supplier workshops — sized to this frame, in your chosen fabric, from a thin dining pad to a full deep-seating build.

Technical sheet issued on request, per piece.

Sheets are issued per piece against the current supplier revision, so the drawing you receive matches what will be built, not an older press.

This piece is printed in the Expormim catalogue, p. 1.

Catalogue extracts issued on request — we publish no self-serve PDF library.

CAD issued on request. This piece has no width, depth or height printed here, so nothing is generated from it.

Care guide issued with delivery documentation.

Brand

Expormim

Collection

Twins

Designer

Mut Design

Category

Dining chairs & armchairs

Suited to

Restaurants & Bars · Golf & Members' Clubs

SKU

ex-C170D