ExpormimDining chairs & armchairs
No photograph of this piece is held. The record below is the supplier specification in full.
TinaExpormim
Armchair
dining chairs & armchairs · SKU ex-T020
MADE TO ORDERShips from Spain · 12–16 weeks door-to-door
MaterialNot on file
TeakAll-weather wickerStainless steelAluminium
As supplied100 39.5” / 99 39” / 111 43.75” / SH 40 15.75”
Width, depth and height are not resolved from the supplied line — request the technical sheet.
No centimetre figure appears on this page until the supplier confirms one. We would rather print nothing than print a number we have not verified.
Custom cushionsMade to order for this frame, in your chosen fabric — commission cushions, or read Cushions & comfort below.
Full specification
- Materials
- Structure in lacquered steel tube 18mm section; seat in rattan natural pelado y tintado 32mm calibre plus hand-woven wicker/médula 8mm section; plastic caps; colour R01 naturale (consistent)
- Material family
- —
- Fabric
- —
- Cushion code
- —
- Customer's own material
- —
- Typology, as supplied
- armchair
- Features
- —
- Handling & storage
- Not stated on this piece’s record — which is not the same as ruled out. Ask us and we will confirm with the factory.
- Working height
- No bar or counter working height on this piece’s record.
- Record notes
- name_es: Sillón “Tina”; Designer: Benedetta Tagliabue - EMBT. PARSING NOTE: this SKU's dimension callouts appeared at the very end of the page's raw text stream (after T060/T061's data), not adjacent to the T020 label; verified correct assignment by cross-checking the rendered page image directly.; design Benedetta Tagliabue - EMBT; photo/colour caption also on p020; catalogue narrative links the weaving technique to the Spanish Pavilion, Shanghai EXPO 2010; range: Rattan Signature Pieces
Kingsley Bate is teak-first, so the browse unit is the material rather than a colourway: the timber is specified by how it is allowed to weather, not by a paint code.
- Teak
- All-weather wicker
- Stainless steel
- Aluminium
Cushion thickness is deck arithmetic, not a style choice: the maker builds the bare frame deck low or high knowing what will sit on it, and the cushion is the remainder to a comfortable finished seat. That is why a dining pad runs thin and deep seating runs thick — neither is an upgrade on the other.
- For a dining chairs or armchair
- 3–6 cm seat pad — slim enough that the shell still reads and knee room under a 74 cm table survives. A metal shell takes the slimmer end with a non-slip base; teak and woven frames carry 4–6 cm, with an optional tied back pad.
- Core
- Exposed pieces take an open-cell, fast-draining (reticulated) core: water passes straight through instead of pooling in the foam. A crowned profile sheds standing water by geometry. Neither makes a cushion waterproof — outdoor builds drain, they do not seal.
- Fabric
- Outdoor cloth earns its keep in the fibre. Solution-dyed yarn carries its pigment all the way through the fibre, so colour survives sun and scrubbing; surface-dyed cloth wears its colour off. Performance fabrics are water-resistant rather than waterproof, and mildew grows on dirt sitting on the cloth, not in the fibre itself — which is why the published care is washing, drying and standing a soaked cushion on edge to drain.
- Patterns & your own fabric
- Fabrics and patterns are fully specifiable — plains, stripes and prints, with repeat, direction and railroading captured in the brief so a pattern lands straight on every panel. Many pieces also accept customer’s own material (C.O.M.) — the brief asks rather than assumes.
Made to order through our supplier workshops — sized to this frame, in your chosen fabric, from a thin dining pad to a full deep-seating build.
Technical sheet issued on request, per piece.
Sheets are issued per piece against the current supplier revision, so the drawing you receive matches what will be built, not an older press.
Request technical sheetThis record was indexed from the Expormim catalogue, p. 21.
Catalogue extracts issued on request — we publish no self-serve PDF library.
Request catalogue extractCAD issued on request. This piece has no resolved W/D/H on file, so nothing is generated from it.
Request CADCare guide issued with delivery documentation.
- Brand
- Expormim
- Collection
- Tina
- Designer
- Benedetta Tagliabue - EMBT
- Category
- Dining chairs & armchairs
- Status
- Enquire
- Certifications
- None recorded
- Suited to
- Restaurants & Bars · Golf & Members' Clubs
- SKU
- ex-T020
From the same categoryTina — all 1 pieces
No official photography is held for the Tina collection — its pieces are indexed as type. The rail shows photographed pieces from the same category.