R.2Biarritz Bench
Official supplier photography.
Chips Collection by MYYOUR
Chips Collection Bench
benches & lawn chairs
As printedH50 x W82 cm
Custom cushionsMade to order for this frame, in your chosen fabric — commission cushions, or read Cushions & comfort below.
Full specification
- Typology, as supplied
- panca/bench
We hold no printed finish or fabric schedule for this piece. The desk confirms what it can be specified in against the supplier’s current book.
Cushion thickness is deck arithmetic, not a style choice: the maker builds the bare frame deck low or high knowing what will sit on it, and the cushion is the remainder to a comfortable finished seat. That is why a dining pad runs thin and deep seating runs thick — neither is an upgrade on the other.
- For a benche
- 4–6 cm at a dining table · 8–10 cm as lounge seating — long runs split into sections over about 1.4 m so no single pad bows or holds water.
- Core
- Exposed pieces take an open-cell, fast-draining (reticulated) core: water passes straight through instead of pooling in the foam. A crowned profile sheds standing water by geometry. Neither makes a cushion waterproof — outdoor builds drain, they do not seal.
- Fabric
- Outdoor cloth earns its keep in the fibre. Solution-dyed yarn carries its pigment all the way through the fibre, so colour survives sun and scrubbing; surface-dyed cloth wears its colour off. Performance fabrics are water-resistant rather than waterproof, and mildew grows on dirt sitting on the cloth, not in the fibre itself — which is why the published care is washing, drying and standing a soaked cushion on edge to drain.
- Patterns & your own fabric
- Fabrics and patterns are fully specifiable — plains, stripes and prints, with repeat, direction and railroading captured in the brief so a pattern lands straight on every panel. Many pieces also accept customer’s own material (C.O.M.) — the brief asks rather than assumes.
Made to order through our supplier workshops — sized to this frame, in your chosen fabric, from a thin dining pad to a full deep-seating build.
Technical sheet issued on request, per piece.
Sheets are issued per piece against the current supplier revision, so the drawing you receive matches what will be built, not an older press.
Request technical sheetThis piece is printed in the MYYOUR catalogue, p. 1.
Catalogue extracts issued on request — we publish no self-serve PDF library.
Request catalogue extractCAD issued on request. This piece has no width, depth or height printed here, so nothing is generated from it.
Request CADCare guide issued with delivery documentation.
- Brand
- MYYOUR
- Collection
- Chips Collection
- Category
- Benches & lawn chairs
- Suited to
- Multi-Residential · Golf & Members' Clubs
Similar piecesChips Collection — all 5 pieces
R.3High bench
R.4Bench
R.5Backless Bench
R.1 Fargo Bench 78 (100)
- House
- iSiMAR
- SKU
- 8019
- Materials
- galvanized steel, polyester powder coat
- Dimensions
- 100×40cm, H78cm
R.6Garden Armchair
R.74' Bench
R.84.5' Bench
R.9Garden Armchair
16 pieces · select a piece to bring it into focus; the focused piece opens its page
1 / 16
The Chips Collection pieces are photographed but not cut out to scale, so this band shows similar pieces that are — same house, category or industry. The collection's own photography is on its pieces.
