R.2Armchair

Official supplier photography.
Push Rope by MYYOUR
Push Rope Dining armchair with cushion
dining chairs & armchairs
As printed80 cm, 43 cm, 55 cm, 58 cm
Custom cushionsMade to order for this frame, in your chosen fabric — commission cushions, or read Cushions & comfort below.
- Typology, as supplied
- Poltrona da pranzo con cuscino / Dining armchair with cushion
The finishes the printed registry offers across the Push Rope collection, as lifted from the printed plates. Which one this piece is built in is confirmed on the technical sheet.
white0400Plates from the MYYOUR finish book, keyed to the collection by the printed registry. Printed colours are approximate — specify against a physical sample.
Cushion thickness is deck arithmetic, not a style choice: the maker builds the bare frame deck low or high knowing what will sit on it, and the cushion is the remainder to a comfortable finished seat. That is why a dining pad runs thin and deep seating runs thick — neither is an upgrade on the other.
- For a dining chairs or armchair
- 3–6 cm seat pad — slim enough that the shell still reads and knee room under a 74 cm table survives. A metal shell takes the slimmer end with a non-slip base; teak and woven frames carry 4–6 cm, with an optional tied back pad.
- Core
- Exposed pieces take an open-cell, fast-draining (reticulated) core: water passes straight through instead of pooling in the foam. A crowned profile sheds standing water by geometry. Neither makes a cushion waterproof — outdoor builds drain, they do not seal.
- Fabric
- Outdoor cloth earns its keep in the fibre. Solution-dyed yarn carries its pigment all the way through the fibre, so colour survives sun and scrubbing; surface-dyed cloth wears its colour off. Performance fabrics are water-resistant rather than waterproof, and mildew grows on dirt sitting on the cloth, not in the fibre itself — which is why the published care is washing, drying and standing a soaked cushion on edge to drain.
- Patterns & your own fabric
- Fabrics and patterns are fully specifiable — plains, stripes and prints, with repeat, direction and railroading captured in the brief so a pattern lands straight on every panel. Many pieces also accept customer’s own material (C.O.M.) — the brief asks rather than assumes.
Made to order through our supplier workshops — sized to this frame, in your chosen fabric, from a thin dining pad to a full deep-seating build.
Technical sheet issued on request, per piece.
Sheets are issued per piece against the current supplier revision, so the drawing you receive matches what will be built, not an older press.
Request technical sheetThis piece is printed in the MYYOUR catalogue, p. 17.
Catalogue extracts issued on request — we publish no self-serve PDF library.
Request catalogue extractCAD issued on request. This piece has no width, depth or height printed here, so nothing is generated from it.
Request CADCare guide issued with delivery documentation.
- Brand
- MYYOUR
- Collection
- Push Rope
- Designer
- MY YOUR
- Category
- Dining chairs & armchairs
- Suited to
- Restaurants & Bars · Golf & Members' Clubs
R.3Armchair
R.4Portofino Chair
R.5Portofino Armchair
R.1 Anglet Chair
- House
- iSiMAR
- SKU
- 7202
- Materials
- galvanized steel, polyester powder coat
- Dimensions
- 49×58×82cm, seat 45cm
R.6Armchair
R.7Tarifa Chair
R.8Tarifa Armchair
R.9Menorca Chair
16 pieces · select a piece to bring it into focus; the focused piece opens its page
The Push Rope pieces are photographed but not cut out to scale, so this band shows similar pieces that are — same house, category or industry. The collection's own photography is on its pieces.


