Gat dining armchair

Finish codes and colour names for this piece.

• 21 white
• 22 black
• 27 red

Printed colours are approximate — specify against a physical sample.

Or ask the desk about finishes for this piece →

Cushion thickness follows the frame: each frame’s seat is built low or high for the cushion it is designed to carry. A dining pad is therefore thin and deep seating thick, and neither is an upgrade on the other.

For a dining chairs or armchair

3–6 cm seat pad — slim enough to keep the lines of the chair in view and leave knee room under a 74 cm table. A metal shell takes the slimmer end, with a non-slip base; teak and woven frames carry 4–6 cm, with an optional tied back pad.

Core

Cushions for exposed pieces have an open-cell, fast-draining (reticulated) foam core, so water runs straight through rather than pooling in the foam. A crowned top sheds standing water. Neither makes a cushion waterproof: outdoor cushions are built to drain.

Fabric

In outdoor fabric, what matters is the fibre. Solution-dyed yarn carries its colour all the way through, so it holds up to sun and scrubbing; surface-dyed cloth loses its colour as it wears. Performance fabrics resist water but are not waterproof. Mildew grows on dirt left on the cloth rather than in the fibre. The usual care advice is to wash and dry the cloth, and to stand a soaked cushion on its edge to drain.

Patterns & your own fabric

Plains, stripes and prints can all be specified. The brief records the repeat, the direction and any railroading, so the pattern lines up on every panel. Many pieces also accept customer’s own material (C.O.M.); the brief asks whether you will supply your own.

Made to order through our supplier workshops: sized to this frame, in your chosen fabric, from a thin dining pad to full deep-seating cushions.

Technical sheet issued on request, per piece.

Each sheet is issued against the maker’s current revision, so the drawing you receive matches the piece that will be built.

This piece appears in the CALMA catalogue.

Catalogue extracts are issued on request.

Plan and elevation are generated from the dimensions on this page.

Rotomoulded polyethylene

Rotational moulding transforms the plastic with a mould, heat and movement: high-density polyethylene particles melt in an oven and spread into the shape the mould was designed to, generally textured and Teflon-lined to give the finished piece its coarse surface.

Cleaning

Water and neutral soap. Never industrial products — glass cleaner among them.

Care guidance from Calma’s catalogue.

Brand

CALMA · Spain

Collection

gat

Designer

SerraydelaRocha

Category

Dining chairs & armchairs

Status

Archive piece

Suited to

Restaurants & Bars · Golf & Members' Clubs

SKU

cl-251