Alat wood 4 seater sofa with cushions

We hold no printed finish or fabric schedule for this piece. The desk confirms what it can be specified in against the supplier’s current book.

Or ask the desk about finishes for this piece →

Cushion thickness is deck arithmetic, not a style choice: the maker builds the bare frame deck low or high knowing what will sit on it, and the cushion is the remainder to a comfortable finished seat. That is why a dining pad runs thin and deep seating runs thick — neither is an upgrade on the other.

For a sofas or settee

10–15 cm seat · 12–15 cm back — always separate cushions rather than one slab, so each panel drains and turns on its own.

Core

Exposed pieces take an open-cell, fast-draining (reticulated) core: water passes straight through instead of pooling in the foam. A crowned profile sheds standing water by geometry. Neither makes a cushion waterproof — outdoor builds drain, they do not seal.

Fabric

Outdoor cloth earns its keep in the fibre. Solution-dyed yarn carries its pigment all the way through the fibre, so colour survives sun and scrubbing; surface-dyed cloth wears its colour off. Performance fabrics are water-resistant rather than waterproof, and mildew grows on dirt sitting on the cloth, not in the fibre itself — which is why the published care is washing, drying and standing a soaked cushion on edge to drain.

Patterns & your own fabric

Fabrics and patterns are fully specifiable — plains, stripes and prints, with repeat, direction and railroading captured in the brief so a pattern lands straight on every panel. Many pieces also accept customer’s own material (C.O.M.) — the brief asks rather than assumes.

Made to order through our supplier workshops — sized to this frame, in your chosen fabric, from a thin dining pad to a full deep-seating build.

Technical sheet issued on request, per piece.

Sheets are issued per piece against the current supplier revision, so the drawing you receive matches what will be built, not an older press.

This piece is printed in the CALMA catalogue.

Catalogue extracts issued on request — we publish no self-serve PDF library.

Plan and elevation are generated from the dimensions on this page.

Larix pine tops

The top is built from three opposed counter-layers of larix pine, glued with a water-resistant polyurethane. The surface takes two treatments — first a sealant base protector, then a single-component aliphatic resin — combining for high resistance to abrasion.

Cleaning

Water and neutral soap.

Silvertex upholstery

A vinyl and polyester multilayer at 685 g/m², carrying SILVERGUARD® silver-ion technology as a natural defence against odour- and stain-causing bacteria, and Spradling’s PERMABLOK® stain-fighting, abrasion-resistant treatment. Wash with water below 30º and neutral soap; no solvents, no abrasive cleaners.

Agora® fabric

100% acrylic at 280 g, Teflon®-treated for outdoor use. Wash below 30º with neutral soap; no solvents or abrasive cleaners, no tumble drying, iron below 150º, no dry cleaning.

Calma catalogue 2018 — materials/materiales (pp.222–223) and fabrics/tejidos (pp.224–225).

Brand

CALMA · Spain

Collection

alat wood

Designer

Andreu Carulla

Category

Sofas

Status

Current range

Suited to

Hotels & Resorts · Workplace

SKU

cl-854