R.2High armchair
ExpormimDining chairs & armchairs
No photograph of this piece appears here. The full specification is below.
Bancos y taburetes / Stools and benches by Expormim
Low stool
dining chairs & armchairs · steel · SKU ex-C930
Materialsteel
As supplied42cm/16.5in x 140cm/55in x 43cm/17in (also offered 42cm/16.5in x 200cm/78.75in x 43cm/17in)
Custom cushionsMade to order for this frame, in your chosen fabric — commission cushions, or read Cushions & comfort below.
Full specification
- Materials
- Steel square tube frame, seat in Trespa (R) HPL 8mm
- Material family
- steel
- Fabric
- Trespa (R) HPL
- Typology, as supplied
- Stool
Trespa (R) HPL
Cushion thickness is deck arithmetic, not a style choice: the maker builds the bare frame deck low or high knowing what will sit on it, and the cushion is the remainder to a comfortable finished seat. That is why a dining pad runs thin and deep seating runs thick — neither is an upgrade on the other.
- For a dining chairs or armchair
- 3–6 cm seat pad — slim enough that the shell still reads and knee room under a 74 cm table survives. A metal shell takes the slimmer end with a non-slip base; teak and woven frames carry 4–6 cm, with an optional tied back pad.
- Core
- Exposed pieces take an open-cell, fast-draining (reticulated) core: water passes straight through instead of pooling in the foam. A crowned profile sheds standing water by geometry. Neither makes a cushion waterproof — outdoor builds drain, they do not seal.
- Fabric
- Outdoor cloth earns its keep in the fibre. Solution-dyed yarn carries its pigment all the way through the fibre, so colour survives sun and scrubbing; surface-dyed cloth wears its colour off. Performance fabrics are water-resistant rather than waterproof, and mildew grows on dirt sitting on the cloth, not in the fibre itself — which is why the published care is washing, drying and standing a soaked cushion on edge to drain.
- Patterns & your own fabric
- Fabrics and patterns are fully specifiable — plains, stripes and prints, with repeat, direction and railroading captured in the brief so a pattern lands straight on every panel. Many pieces also accept customer’s own material (C.O.M.) — the brief asks rather than assumes.
Made to order through our supplier workshops — sized to this frame, in your chosen fabric, from a thin dining pad to a full deep-seating build.
Technical sheet issued on request, per piece.
Sheets are issued per piece against the current supplier revision, so the drawing you receive matches what will be built, not an older press.
Request technical sheetThis piece is printed in the Expormim catalogue, p. 122.
Catalogue extracts issued on request — we publish no self-serve PDF library.
Request catalogue extractCAD issued on request. This piece has no width, depth or height printed here, so nothing is generated from it.
Request CADCare guide issued with delivery documentation.
- Brand
- Expormim
- Collection
- Bancos y taburetes / Stools and benches
- Category
- Dining chairs & armchairs
- Suited to
- Restaurants & Bars · Golf & Members' Clubs
- SKU
- ex-C930
Similar piecesBancos y taburetes / Stools and benches — all 3 pieces
R.3Anglet Chair
R.4Armchair
R.5Armchair
R.1 Low armchair
- House
- Expormim
- SKU
- ex-C170D
- Range
- Twins
- Materials
- aluminium tube frame: 100 white / 107 brown / 101 black / 109 champagne fine textured; 3D Mesh Omega Outdoor weave: black/taupe/paprika/turquoise
- Dimensions
- 89 x 75 x 85 cm / 35" x 29.5" x 33.5"; SH 28cm/11"; weight 13kg/29lb; volume 0.68m3/24ft3
- Designer
- Mut Design
R.6Portofino Chair
R.7Portofino Armchair
R.8Armchair
R.9Tarifa Chair
16 pieces · select a piece to bring it into focus; the focused piece opens its page
1 / 16
No official photography appears for the Bancos y taburetes / Stools and benches collection — its pieces are shown as type. The band shows photographed similar pieces from the same house, category or industry.
Fabric
The canopy fabric as specified.
Trespa (R) HPL
